All Posts By

kineticor

HealthTrust Innovation Summit – Tucson, Arizona

KinetiCor attended the 2018 HealthTrust Innovation Summit to demonstrate our Kinetic Sensor along with Siemens Healthineers. The HealthTrust Innovation Summit is an opportunity for suppliers to present products that represent significant technological advancement and meaningful improvement in clinical outcomes or patient care. The Kinetic Sensor, an in-bore camera system that enables technologists to visually monitor the patient’s face, is a part of Siemens Biomatrix Technology on the new FDA approved MAGNETOM Sola MRI System.  We are looking forward to RSNA, taking place November 25th-29th in Chicago, where we can be found at South Hall Booth 4932.

FDA Clears MAGNETOM Sola 1.5T MRI Scanner from Siemens Healthineers

https://usa.healthcare.siemens.com/press-room/press-releases/magnetomsola.html

• First 1.5T MRI scanner featuring innovative BioMatrix technology to reduce variations in patient imaging
• New applications such as SMS TSE reduce scan times by up to 46 percent

The Food and Drug Administration (FDA) has cleared the MAGNETOM Sola, a 1.5 Tesla magnetic resonance imaging (MRI) scanner from Siemens Healthineers that brings groundbreaking BioMatrix technology to the 1.5T market. This technology addresses patient anatomical and physiological differences, as well as differences in how users set up and conduct MRI exams, to increase productivity and decrease rescans for improved efficiency and patient satisfaction. With the MAGNETOM Sola, Siemens Healthineers is expanding precision medicine and transforming the delivery of patient care.

The MAGNETOM Sola helps healthcare providers perform a full range of routine and complex MRI exams while accelerating workflow and delivering consistent results across all patient types. BioMatrix Sensors save setup time and inform the correct exam strategy. Respiratory Sensors in the patient table eliminate the need for navigators with respiratory-triggered sequences. A new Kinetic Sensor, an in-bore camera system, enables technologists to visually monitor the patient’s face. BioMatrix Tuners improve the quality and reproducibility of head, neck, and spine imaging using distortion-mitigating software and hardware. BioMatrix Interfaces utilize artificial intelligence and body models to expedite patient positioning and deliver consistent, reproducible results.

The scanner architecture offers extremely high performance in an open, 70-cm bore. Larger body regions can be covered in one step with a full 50x50x50 cm field of view. Ultra-lightweight, anatomy-adaptive coils improve patient comfort while delivering high signal-to-noise ratio with up to 204 RF channels.

New software enables faster scanning to benefit patients and the facility. Multi-Slice TSE reduces routine musculoskeletal scan times by up to 46 percent. Compressed Sensing not only makes cardiac and dynamic liver exams faster but also enables imaging of patients who cannot reliably hold their breath.

Combined with Dot workflow engines and Tim 4G technology, the software accelerates scanning from positioning to post-processing with continual quality control of image data. The result is increased productivity and consistency across patients and exams.

“With the MAGNETOM Sola, we provide the 1.5T market with the latest MRI advancements designed to overcome the challenges of imaging diverse patient populations,” said Jane Kilkenney, Vice President of Magnetic Resonance, Siemens Healthineers North America. “By delivering unmatched levels of automation and personalization that address patient and user variability, we enable customers to achieve high-quality imaging – consistently and efficiently – across all patients and procedures.”

A cardiovascular edition of the MAGNETOM Sola – which includes high-performance hardware and software such as Compressed Sensing Cardiac Cine, MyoMaps, and the Cardiac Dot engine – is also available.

 

ISMRM- Paris, France

It was an exciting and busy week in Paris at ISMRM. Over 135 people visited the Kineticor booth representing more than 100 facilities around the world. Researchers that visited explore areas such as fMRI, pediatrics, PET/MR, MR guided ultrasound, and surgical biopsies, among many others. Siemens Healthineers also announced our collaboration on the Kinetic Sensor which is an integral part of and one of the key features of the BioMatrix technology and of the new 1.5 Tesla MRI scanner Magnetom Sola and of the 3T Magnetom Vida system. Learn more about BioMatrix technology and the Kinetic Sensor here:

        

       

Siemens Healthineers and KinetiCor present jointly developed MRI technologies for real-time motion correction

https://www.healthcare.siemens.com/press-room/press-releases/pr-20180617020shs.html

  • In-bore camera system supports BioMatrix technology to deliver consistent image quality, independent of patient motion
  • Joint solution allows more informed treatment decision making and paves the way for precision medicine

Siemens Healthineers and KinetiCor present at the 26th Annual Meeting of the International Society for Magnetic Resonance in Medicine (ISMRM) in Paris (June 16 – 21, 2018) the joint results of their strategic agreement to co-develop technologies for patient monitoring and correction of patient motion in MRI exams. The strategic collaboration of both companies involves the joint development of an MRI in-bore camera system to expand precision medicine. The Kinetic Sensor, an integral part and one of the key features of Siemens Healthineers BioMatrix technology and of the new 1.5 Tesla MRI scanner Magnetom Sola and of the 3T Magnetom Vida system, is the first ever in-bore, real-time patient viewing system, allowing close patient monitoring and prospective motion correction for neurological MRI exams.

A successful MRI exam requires a patient to stay still. Patient motion, however, can result in non-diagnostic exams, requiring rescans or in the worst case having to reschedule the exam. For certain patients, such as young children and adults who have trouble staying still due to pain, trauma and/or cognitive difficulties, sedation may be required for a successful MRI exam. For these reasons, patient motion is a known and costly factor in MRI. The new in-bore camera system helps to significantly reduce motion-related artifacts in MR imaging, enabling diagnostic imaging in the presence of motion, and may help reduce the need for sedation for children and adults who are less able to stay still in the MRI scanner. The sensor employs a 4-camera system which tracks every movement of the patient’s head in the scanner. The camera has an ultra-slim profile, shaped to the bore of the Magnetom Sola and Magnetom Vida MRI systems. Real-time motion information from KinetiCor’s camera, used in combination with Siemens Healthineers MR pulse sequences with integrated prospective motion correction technologies, enables the imaging to continually adapt to the patient’s movements. The resulting product, the new BioMatrix Kinetic Sensor on the latest scanner generation of Siemens Healthineers, helps deliver standardized, high-quality MRI examinations that support clinical users on their way to delivering precision medicine.

Jeffrey Yu, MD, Chief Executive Officer at KinetiCor, expressed excitement about the strategic agreement with Siemens Healthineers and what this will mean for the future of MR imaging. “KinetiCor is delighted with the successful collaboration with Siemens Healthineers as one of the leading MR manufacturers. Together, we will jointly bring the first real-time patient monitoring and advanced prospective motion correction system to the market. The KinetiCor system increases diagnostic quality, is able to reduce rescans, and to improve patient comfort while improving workflow efficiency and patient throughput,” he concluded.

“Working closely with our valued partners, we were once again able to demonstrate our role as a leading innovator in the field of magnetic resonance imaging,” stated Dr. Christoph Zindel, Head of Magnetic Resonance Imaging at Siemens Healthineers. “We are very pleased that KinetiCor’s path breaking in-bore camera and motion-correction technologies are becoming an integral part of Siemens Healthineers BioMatrix technology – allowing for automatic adaptation to each and every patient. With our BioMatrix technology our customers are able to decrease rescans and to cut healthcare costs by reducing unwarranted variations. With this, we continously expand precision medicine,” said Zindel.

Hawaii Diagnostic Radiology Services, USA, is one of several sites where the Kinetic Sensor is currently employed for research purposes. According to Marshall Miyoshi, HDRS Chief Operating Officer, “the Kinetic Sensor, unlike current motion correction techniques, uses an innovative approach to track motion and correct it in real time. This produces a dramatic improvement in image quality, reducing motion artifacts and providing clearer visualization of the brain with negligible impact on MR technician workflows.”

The products/features (here mentioned) are not commercially available in all countries. Due to regulatory reasons their future availability cannot be guaranteed.

10th Magnetom World Summit – Bamberg, Germany

KinetiCor was pleased to be invited to be one of three sponsors at the 10th Magnetom World Summit.

The Summit was a wonderful venue to meet Siemens MR customers from around the globe as they learned about the newest advances in MR. It was exciting to demonstrate the KinetiCor solution to such a forward-looking set of MR enthusiasts, and Bamberg was a perfect backdrop:  a beautiful and historic city close to the Siemens MR factory in Erlangen, Germany.

     

European Congress of Radiology – Vienna, Austria

Vienna was chilly and beautiful for the European Congress of Radiology this year. We presented our solution in the KinetiCor booth in Expo 1,  and it was also showcased with the new Siemens SOLA 1.5T MR scanner.

The Kinetic camera is now embedded in the Siemens Biomatrix Platform as the Kinetic sensor, allowing superior visualization of the patient – inside and out.

   

Kawin Setsompop, PhD joins the KinetiCor Advisory Board

Dr. Kawin Setsompop has become a member of the KinetiCor Advisory Board. Dr. Setsompop is an Associate Professor in Radiology at Harvard Medical School and an Affiliated Faculty member at Harvard-MIT Division of Health Sciences and Technology (HST). He received his Ph.D. in Electrical Engineering and Computer Science from MIT. 

Over the last decade, Dr. Setsompop has pioneered the development of a number of MRI acquisition technologies, including parallel transmission and simultaneous multi-slice imaging. In particular, his blipped-CAIPI technology has been distributed to more than 200 research and clinical sites and is now a clinical product on MRI scanners worldwide. His technology is changing how diffusion, perfusion, and functional MRI are being performed today.

Robert Herfkens, MD joins the KinetiCor Advisory Board

Dr. Robert Herfkens, Professor of Radiology and Associate Chair for Clinical Technology in Radiology at Stanford University, has joined the KinetiCor Advisory Board.

Dr. Herfkens received his MD degree from Loyola University Stritch School of Medicine. He underwent residency and fellowship training in Radiology and Nuclear Medicine at University of California San Francisco (UCSF) and is currently director of MRI at Stanford University. His research interests include fundamentals of MR imaging and cardiovascular imaging. He has published over 250 scientific publications,  has served on multiple editorial boards, and is past president of the International Society of Magnetic Resonance in Medicine (ISMRM).  

Radiological Society of North America – Chicago, IL

The KinetiCor booth was amazingly busy! Our solution was presented to the industry in the KinetiCor booth as well as in the Siemens booth as part of the premiere of the new VIDA 3T MR scanner.

It was very gratifying to see that prospective motion correction is of such interest and importance to MR customers.

If you missed us in 2017, look for us at RSNA 2018, in booth 4932.